fully automatic chain link fence machine cost
I. Description
Illustration of working principle:
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the die of diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to the next stitch to take place.
Application: Chain Link Fence is extensively used as fences for playground and gardens, highway, railway, airport, port, residence, etc.
Advantages:
1. It adopts the technique of single model and double helix and it can improve the work efficiency greatly.
2. Japan Mitsubishi PLC (Programmable Logic Controller)
3. French Sch***er inverter
4. Chinese top servo motor (make the production more precise).
5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge.
6. There is a controller cabinet hanging and it can set the length of the wire mesh, once the weaving finish, it will stop.
7. An alarm device has been installed, once the production is completed, the alarm will ring. There is a limit switch and it can stop immediately.
8.Speed of die:500r/min
II.Technical Parameter
| Model |
LW25-85 |
| Width scope of weaving |
≤3m/4m |
| Mesh scope of weaving |
25mm-85mm |
| Wire scope |
1.8-4.0mm |
| Outside size |
Main machine |
6700*1430*1800 |
| Net reel |
5100*1700*1250 |
| Motor |
Servo Motor |
5.5kw |
| Cutter |
1.5kw |
| Rolling |
0.75kw |
| Raw Material |
Galvanized wire;PVC bag steel wire |
III.Diameter of Wire Mesh opening size
| Diameter of Wire |
Mesh opening size |
| 1.8mm |
25-40mm |
| 2.0mm |
30-50mm |
| 2.2mm |
30-60mm |
| 2.5mm |
40-70mm |
| 2.8mm |
50-80mm |
| 3.0mm |
60-80mm |
| 3.2mm |
70-80mm |
| 3.5mm |
80-85mm |
| 4.0mm |
85*85mm |
IV.Company:
V.Contact Information
Audited Supplier 
){kind=link}
){kind=link}