Steel Bar Reinforcing Mesh Panel Welding Machine

• Wire Diameter: 4-10mm/5-12mm
• Mesh Opening Size: 100*50-300*300mm
• Mesh Width: 2500mm
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: JK-FS-2500G
• Mesh Length: Max.12m
• Mesh Type: Panel
• Welding Speed: 40-60times/Min
• Control System: Panasonic PLC
• Wire Material: Ribbed Bar/Round Bar
• Voltage: 220/380/415/440V
• Power Supply: 200kv
• Transport Package: Plastic and Wooden Box
• Specification: CE, ISO. SGS
• Trademark: JIAKE
• Origin: China
• HS Code: 8515809090
• Production Capacity: 6500kg

Product Description

Reinforcing steel mesh panel sheet welding machine




Description
1.Control system
Adopt synchronous control technique,the cent-control and welding time are composed of Panasonic PLC& CNC control system .The input front panel adopt touch screen ,make the operation intelligent and reasonable
2.Mesh drawing system
The mesh pulling wire adopt Panasonic servo motor , its very accurate and stable ,can control its space at very small error and keep the mesh panel flat
3.Wire feeding system
1.Cross wire feeding from the multi hopper device automatically , its capacity is over ten times than the traditional hopper
2.The long wire should be put into the slot tunnel by worker manually , by adjusting slot tunnel ,can fed different diameter wire , make the mesh aperture accurate.
4.Welding electrodes
There are 24 pcs of water cooling electrodes that are special-designed and are made of square column copper. They have little wear rate and can be used on two sides
5.Welding Transformer
The machine equips with 12 pieces of typical and efficient water-cooling transformers, which has 8 grades, enlarging the welding wire diameter range.
6.Advantage of the machine
1. Schneider brand low-voltage apparatus in the electric control cabinet.
2. The machine will adopt brake motor+ reducer, increasing welding speed and stability.
3. The mesh drawing system in cycle is automatically calculated, no need manual setting.
4. The mesh drawing car will be back to origin automatically after finish the pulling.
5. The machine will stop working automatically if there is no cross wires in hopper device.
6. Every piece of mesh only needs once-through operation on the cabinet.
7.The machine added bear wire net and carry equipment that makes the working more convenience
8.The welding part used the springiness input wire trunking makes the welding copper use long time
Technical parameter

Wire Diameter	4-10mm/5-12mm	Width of Mesh	2500mm
Longitude Wire Space	100-300mm	Cross Wire Space	50-300mm
Welding Electrodes	24 pcs	Welding Speed	40-60 times/min
Longitude Wire Feeding	Pre-straightened&pre-cut	Cross Wire Feeding	Pre-straightened&pre-cut
Rated Electrical Power	100kva*12pcs	Rated Voltage	220/380/415/440v
Overall Size	14*3.2*2.3m	Weight	6500kg

We have export this machine to India ,Russia,  Algeria, Jordan, Turkey , Romania ,Estonia ,Mexico,Brazil ...


Contact person :
Erin
[phone]
 
Inquiry now. We will reply at first time.