2018 Economic Automatic Welded Roll Mesh Machine

• Model: Jiake Dnw
• Wire Diameter: 0.4-2.5mm
• Cooling Way: Air Cooling/Water Cooling
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Material: Low-Carbon Steel Wire (Black Wire) and Galvanized
• Technology: Separate Control Technology
• Welding Transformer: 8 Degrees, Can Be Adjusted for Different Wire Diam
• Inverter: Delta
• Voltage: as You Requested
• Guarantee Time: 1 Year
• Application: Construction Mesh, Wall Mesh, Animal Cage, Mining
• Transport Package: in Container
• Trademark: JIAKE
• Origin: China
• Production Capacity: 30 Units/Month

Product Description

2018 economic automatic welded roll mesh machine

Technical Parameters----
     Welded wire mesh machine, also called, welded roll mesh machine, electric welded mesh machine. Our roll welding wire mesh machine is featured by wire coil feeding and invert speed control.It is used to make wall mesh,construction mesh,animal cage, mining etc.

Type	DP-DNW-1	DP-DNW-2	DP-DNW-3
Wire diameter	0.4-0.65mm	0.65-1.8mm/0.8-2mm	1.0-2.2mm/1.2-2.5mm
Aperture/pitch	1/4″,1/2″ 6.25,12.5mm	1/2″,1″,2″,3″,4″ 12.5,25,50mm	1″,2″,3″,4″ 25,50,75,100mm
Mesh width	Max.1m,1.2m	Max.1.2m,1.5m,2m	Max.1.2m,1.5m,2m,2.5m
Motor	2.2kw	2.2kw;4kw	4kw;5.5kw
Welding speed	Max.75 rows/min	Max.120-180 rows/min	Max.80-120 rows/min
Transformer	50kva∗3	60kva∗4;60kva∗5;60kva∗7	70kva/80kva∗5/6/7/8
Weight	1.5T	2T/2.5T	2T/2.5T/3T/3.5T

•  We can design the machine according to your wire diameter,mesh hole size and mesh width. 

Machine Description----
1 The longitude wire and cross wire are fed from wire coils automatically. Longitude wire :Wire rolling machine+Bobbin stand-off with rollers (0.65-1.2mm) Iron wire pay-off (1-2.5mm).Cross wire:wire pay-off
2 The cross wire are pre-straightened &pre-cut.
3 The middle knife can cut the mesh into 2 mesh if width enough.The side knife will cut the extra cross wire out of side.
4 The thorn shaft(above big shaft) is to fix the mesh.
5 The little shaft is to keep the tensity of mesh.
6 In front of machine on the right is control cabinet.It can adjust speed.
7There are transformer,motor,reducer on the backside of machine.
8 The raw material can be low-carbon steel wire (black wire) and galvanized wire.
9 We will use Schneider electric components, Delta inverter in the electric control cabinet.
We will use the best quality main motor&reducer, it will be equipped with inverter.
10 The middle cutter and sider cutters can be adjusted randomly to make two mesh rolls at same time.The mesh roll length can be set by counter switch on the control panel.
11 The welding transformers have 8 degrees and can be adjusted for different wire diameters.The welding time and welding current can be adjusted on the control panel to adjust the welding degree.



Advantage----
1. easy operated
2. high production
3. advanced technology electronics.
4.Separate control technology, make welding transformers working separately to reduce needed capacity.
5.Different position of button and control box with inverter (Taiwan Delta), not easily broken like before, easier to operate.
6.Sealed welding transformers, it has 8 degrees, can be adjusted for different wire diameters.
7.Square steel bottom instead of angle iron bottom. 1.5mm steel plate instead of 0.2-0.3mm steel plate, more stable.






Contact Us----