Reinforcing Steel Mesh Panel Sheet Welding Machine
|1 2 3-4 5-9 10+|
|FOB Unit Price:||US $60,000 US $55,000 US $50,000 US $45,000 US $30,000|
|Purchase Qty. (set)||FOB Unit Price|
|Transport Package:||Plastic and Wooden Box|
|Payment Terms:||L/C, T/T, Western Union|
- Model NO.: JK-FS-2500G
- Current: Inverter Current
- Application: Building&Construction
- Mesh Opening Size: 100*50-300*300mm
- Mesh Length: Max.12m
- Welding Speed: 40-60times/Min
- Wire Material: Ribbed Bar/Round Bar
- Power Supply: 200kv
- Specification: CE, ISO. SGS
- HS Code: 8515809090
- Type: Resistance Welders
- Model: TIG
- Wire Diameter: 4-10mm/5-12mm
- Mesh Width: 2500mm
- Mesh Type: Panel
- Control System: Panasonic PLC
- Voltage: 220/380/415/440V
- Trademark: JIAKE
- Origin: China
Adopt synchronous control technique,the cent-control and welding time are composed of Panasonic PLC& CNC control system .The input front panel adopt touch screen ,make the operation intelligent and reasonable
2.Mesh drawing system
The mesh pulling wire adopt Panasonic servo motor , its very accurate and stable ,can control its space at very small error and keep the mesh panel flat
3.Wire feeding system
1.Cross wire feeding from the multi hopper device automatically , its capacity is over ten times than the traditional hopper
2.The long wire should be put into the slot tunnel by worker manually , by adjusting slot tunnel ,can fed different diameter wire , make the mesh aperture accurate.
There are 24 pcs of water cooling electrodes that are special-designed and are made of square column copper. They have little wear rate and can be used on two sides
The machine equips with 12 pieces of typical and efficient water-cooling transformers, which has 8 grades, enlarging the welding wire diameter range.
6.Advantage of the machine
1. Schneider brand low-voltage apparatus in the electric control cabinet.
2. The machine will adopt brake motor+ reducer, increasing welding speed and stability.
3. The mesh drawing system in cycle is automatically calculated, no need manual setting.
4. The mesh drawing car will be back to origin automatically after finish the pulling.
5. The machine will stop working automatically if there is no cross wires in hopper device.
6. Every piece of mesh only needs once-through operation on the cabinet.
7.The machine added bear wire net and carry equipment that makes the working more convenience
8.The welding part used the springiness input wire trunking makes the welding copper use long time
Width of Mesh
Longitude Wire Space
Cross Wire Space
Longitude Wire Feeding
Cross Wire Feeding
Rated Electrical Power
We have export this machine to India ,Russia, Algeria, Jordan, Turkey , Romania ,Estonia ,Mexico,Brazil ...
Contact person :Edson an
Inquiry now. We will reply at first time.