High Speed Concrete Reinforcing Steel Wire Mesh Welding Machine

• Customization: Available
• After-sales Service: Lifetime
• Type: Welded Wire Mesh Machine
• Model NO.: JK-FS-2500G
• Voltage: 220/380/415/440V
• Warranty: 1 Year
• Wire Diameter: 5-12mm
• Mesh Opening Size: 100*50-300*300mm
• Mesh Width: 2500mm
• Mesh Length: Max.12m
• Mesh Type: Panel
• Welding Speed: 45-65times/Min
• Control System: Panasonic PLC
• Wire Material: Ribbed Bar/Plain Bar
• Power Supply: 200kv
• Transport Package: Plastic and Wooden Box
• Specification: CE, ISO. SGS
• Trademark: JIAKE
• Origin: China
• HS Code: 8515809090
• Production Capacity: 6500kg

Product Description

high speed concrete reinforcing steel wire mesh welding machine


Description
1.Control system
Adopt synchronous control technique,the cent-control and welding time are composed of Panasonic PLC& CNC control system .The input front panel adopt touch screen ,make the operation intelligent and reasonable

2.Mesh drawing system
The mesh pulling wire adopt Panasonic servo motor , its very accurate and stable ,can control its space at very small error and keep the mesh panel flat

3.Wire feeding system
1.Cross wire feeding from the multi hopper device automatically , its capacity is over ten times than the traditional hopper
2.The long wire should be put into the slot tunnel by worker manually , by adjusting slot tunnel ,can fed different diameter wire , make the mesh aperture accurate.

4.Welding electrodes
There are 24 pcs of water cooling electrodes that are special-designed and are made of square column copper. They have little wear rate and can be used on two sides

5.Welding Transformer
The machine equips with 12 pieces of typical and efficient water-cooling transformers, which has 8 grades, enlarging the welding wire diameter range.

6.Advantage of the machine
1. Schneider brand low-voltage apparatus in the electric control cabinet.
2. The machine will adopt brake motor+ reducer, increasing welding speed and stability.
3. The mesh drawing system in cycle is automatically calculated, no need manual setting.
4. The mesh drawing car will be back to origin automatically after finish the pulling.
5. The machine will stop working automatically if there is no cross wires in hopper device.
6. Every piece of mesh only needs once-through operation on the cabinet.
7.The machine added bear wire net and carry equipment that makes the working more convenience
8.The welding part used the springiness input wire trunking makes the welding copper use long time

7.Machine structure
The machine mainly consists of holding wire platform, main welding part, cross wire hopper device, ladder& stand, electric control cabinet, mesh drawing part and bracket etc.

8.Machine usage
The machine is widely used in producing building construction mesh, fence wire mesh, concrete steel reinforcing mesh, enclosure mesh, etc.

9.Wire material
Usually cold-rolling ribbed rebar & round rebar

Technical parameter

Wire Diameter	5-12mm	Width of Mesh	2500mm
Longitude Wire Space	100-300mm	Cross Wire Space	50-300mm
Welding Electrodes	24 pcs	Welding Speed	60 times/min
Longitude Wire Feeding	Pre-straightened&pre-cut	Cross Wire Feeding	Pre-straightened&pre-cut
Rated Electrical Power	100kva*12pcs	Rated Voltage	220/380/415/440v
Overall Size	14*3.2*2.3m	Weight	6.5T

Company Information
Hebei Jiake Welding Equipment Co.,Ltd  is a profesinal manufacture have 10000M2 factory with more than 20 years experience ,Specialize in the welding machine and equipment :wire mesh welding machine ,fence mesh welding machine,chicken cage welding machine , rabbiet cage welding machine ,reinforcing mesh welding machine,automatic welded mesh machine and producttion line of wedged screen and steel gratings.

Inquiry me now , I will reply you immediately !