Low Carbon Steel Straight Type Horizontal Wire Drawing Machine

• Customization: Available
• After-sales Service: Commission Service, Technical Support
• Warranty: 1 Year
• Type: LZ Straight-Line Metal Drawing Machine
• Usage: Wire
• Metal Material: Steel
• Outlet Diameter: 1.2
• Max.Inlet Wire Dia.: 6.5mm
• Block Dia.: 560mm
• Max. Number of Block: 12
• Certification: ISO
• Condition: New
• Transport Package: Plastic Film
• Trademark: Jiake
• Origin: Made in China
• HS Code: 846330000
• Production Capacity: Max. 16tons/24hours.

Product Description

Low carbon steel straight type horizontal wire drawing machine  

1.Straight wire drawing machine LZ-560A:
The fully automatic wire drawing machine used drawing drum is equipped with Inverter to adjust speed saving 30% electricity. Straight wire drawing machine with hardened reducer, little noise, fast speed, less friction, longer service life. Water cooling technology is to extend machine life efficiently. The finished product is used to produce standard parts (welding rod, wire nail, screw, etc.).

Straight line nail wire gi wire drawing machine



The straight wire drawing machine is a high-speed wire drawing machine. Its main features are that the drum adopts narrow slot type water cooling, which has a good cooling effect.
It adopts the first-class strong narrow V-belt and the first-class plane double enveloping worm gear pair for high transmission efficiency and low noise.
The fully enclosed protection system has good safety; the air tension tuning is adopted to ensure stable drawing.

1. The work process of the wire drawing machine

	Wire Pay-off Device: The wire Pay-off device is usually according to the type in the picture, pneumatic lifting pulley, convenient wire threading. We can also produce hydraulic wire pay-off systems. Derusting Device: The dedusting device uses high-speed operation to twist the wire rod at different angles to remove the rust on the surface.
	Main wire drawing machine The main functions of a straight wire drawing machine include calculate production, automatic deceleration and stop at a fixed length, wire breaking detection and automatic stop, positive and negative jogging of any drum, display of various fault information and processing information, and monitoring of various motion information. The drum of the drawing machine adopts narrow slot water cooling, which has a good cooling effect. And it is not easy to enter the dust. The drum is sprayed with tungsten carbide coating to prolong the service life.
	Wire Take Up Machine Wire take up machine uses adjustable speed motor, in order to be able to automatically cycloid, so that the operation becomes more simple and convenient. Generally, we have two ways to take up: Spooler take-up machine, and Trunk take-up machine.

2. The Parameters of the Wire Drawing Machine

Model	JK-LZ-560	JK-DLW-550	JK-DLW-350
Raw material	High/Low-carbon steel wire/galvanized wire etc.
Speed control	INOVANCE Inverter adjusting speed, saving 30% electricity.
Number of drawing pots	1-10pcs	1-8pcs	1pcs
Inlet wire diameter	Max. 8mm	Max. 6.5mm	Max.2mm
Outlet wire diameter	Min. 1.6mm	Min. 2mm	min. 0.8mm
Production capacity	Max. 90mm/min	Max. 414m/min	Max. 280m/min
Motor capacity	22kw	18.5kw	22kw
Output	31T/day	10T/day	38T/day
One drawing pot weight	1800kg	1500kg	1800kg
One drawing pot size	1.2*1.5*1.3m	1*1*2.1m	2.4*1.1*1.1m

3. The Feature of the Wire Drawing Machine
1. INOVANCE Inverter adjustable motor and gearbox for adjusting speed, saving 30% electricity;
2. Block body is made of thickness high tensile strength steel plate and square tube, shock-resistance.
3. Drawing path is painted with the surface of Tungsten carbide, a long lifetime.
4. Water cooling system to decrease the working temperature, working smoothly, and service life extended.
5. Safety operation with Centralized control panel.
6. The main motor is copper leads inside and the motor is at least 18.5KW for enough power supply.
7. Hardened reducer, little noise, fast speed.
8. Safety operation with steel covers and doors and obvious signs above the drawing blocks.
Contact us. Get More Information about Wire Drawing Machine

4. Function of Wire Drawing Machine
There are many suitable drawing materials for straight wire drawing machine, including welding rod; welding wire (gas shielded wire, submerged arc wire, flux-cored wire, etc.); steel wire (high, medium, and low carbon steel wire, stainless steel wire, tire steel wire, hose steel wire, spring steel wire, steel cord, etc.); electric wire (aluminum clad steel wire, copper wire, aluminum wire, etc.); alloy wire, etc.

5. Technical Service
We provide professional technical support, including technical consultation, machine design, plant layout design, and one-stop solutions.
Before-sales Service: Professional technicians solve your problems.
After-sales Service: We offer Installation video, Manual and Online service. We can send engineers to train workers in the Client's factory.
Spart part Service: Provide lifetime accessories service.

6. Our experience

NOW Get a Free Quote from Heibei JIAKE Machinery.

2.Double-block Electric Furnace (Aneal wire)
Electric furnace is used to anneal the wire. So, the wire is not easy to break and can be redrawn into smaller diameter. Each furnace is equipped with three 8 annealing blocks for cycling use. This machine adopts the two-section intelligent separate temperature control, silicon controlled, the precision is very high.
Double-block Electric furnace, can load two annealing blocks each time, high capacity.

Model	Double-block Electric furnace	Control system	PID Touch screen control
Heating method	Electricity	Annealing block	Stainless-steel block
Load capacity	Max.15tons	Working temperature	Maximum 1000°
Loading size	1000×2300mm	Voltage	Customized as your request
Furnace inner size	1350×2600×2500mm	Rated Power	220KW
Overall dimension	2200×3400×3000mm	Weight	5500KGS

3. High speed wet drawing machine B17et drawing machine B1

Power Control	Double Inverter Control
Max. Die No.	17
Inlet Wire Dia.	Max. 2mm
Finished Wire Dia.	0.30 - 0.85mm
Max. Line Speed	Max. 1500m/min
Slip Ratio	15%
Fixed Speed Capstan Slip Ratio	10%
Drawing Capstan	Carbon Fiber
Drawing Power	22KW
Take-up Power	5.5KW
Fixed Speed Capstan Dia.	200mm
Take-up Reel Size	350mm ,300mm, 400mm or following customers' requirement.
Take-up Type	Shaft Type
Winding Displacement	110KW Synchronous Motor+Flat Belt
Transmission Type	Synchronous Transmission
Take-up Control	PID Displacement Detection, Automatic Control
Detecting Device	Weight Balance by Swing Arm
Tension Adjusting Type	Weight Balance Type
Drawing Capstan Lubrication Type	Fully immersed
Brake	Electromagnetic Brake
Bearing Lubrication	Oil free
Working Voltage	As your request.
Size	2680mm*1200mm*2100mm
Weight	2500KG

4. Loading photos:

Till now, our  mesh welding machine was sold to more than 120 countries and regions including: Russia,  Canada, U.S.A., Mexico, Romania, Bulgaria, Greece, Turkey, Algeria, South Africa, Tunisia, Ethiopia, Uganda, UAE, Iran, KZ, India, Thailand, Malaysia, Indonesia, Argentina, Brazil, Guatemala, Peru.

And till now, our anticlimb fence welding machine occupied 70% India; 

our chicken cage welding machine occupied 70% Indonesia;

our 25-80 chain link fence machine occupied 70% Thailand.

Our wire mesh machine occupied 70% Uganda market.

5. FAQ to Hebei Jiake Welding Equipment Co.,LTD

Q1: Where is your factory located?
A: Our factory is located in Anping county, Hebei Province of China. The nearest airport is Beijing airport or Shijiazhuang airport. We can pick you up from Shijiazhuang city.

Q2: How many years are your company engaged in the wire mesh machines?
A: More than 25 years. We have our own technology develop department and testing deparment.

Q3: Can your company send your engineers to my country for machine installation, worker training?
A: Yes, our engineers went to more than 100 countries before. They are very experienced.

Q4: What's the guarantee time for your machines?
A: Our guarantee time is 2 years since the machine was installed in your factory.

Q5: Can you export and supply the customs clearance documents we need?
A: We have much experience for exporting. And we can supply the CE certificate, Form E, passport, SGS report etc, your customs clearance will be no problem.

6. Our factory - Hebei Jiake Welding Equipment Co.,LTD
Hebei Jiake Welding Equipment Co., Ltd., founded in 2000, is located at the junction of Bejing, Tianjin and Shijiazhuang - Anping county, which is famous as "Hometown of wire mesh" in China. We are a professional manufacturer of wire mesh machinery. Our company has been developing smoothly and quickly and now we have more than 100 employees. We have our own wire mesh machinery and several pilot plants with strong technical force and advanced production and checkout equipment.
Our main products: 3D panel production line, steel bar mesh welding machine, CNC fence mesh welding equipment, EPS panel production line, 3D panel wire mesh machine (bevel inserting combination joint machine), reinforcing construction mesh (heat separate mesh) welding machine, welding equipment of mine sieve mesh, breed aquatics mesh welding machine, floor warming mesh welding machine, steel grating welding equipment, hexagonal mesh weaving machine, expanded metal machine, razor wire machine, Diamond mesh machine, pneumatic spot welding machine and straightening & cutting machine.

 

7.Our customers - Hebei Jiake Welding Equipment Co.,LTD
We stick to the business principle of "Favorable comments from high quality product and service", and thus we supply a whole-process service from product designing, developing, producing, installing and after-sales service for the clients with first-class techniques top-grade products. Our company has been awarded the title of "Credible and Reliable Product & Service Supplier" by numerous users. We also keep developing on basis of superexcellent management level and advanced development consciousness so as to bring our machinery to both domestic and overseas markets.We sincerely look forward to your cooperation in future and warmly welcome your arrival to build our common beautiful future.

8.Contact Us:
Mr. Polar Xiao  (Sales Manager)      

 

 

 

....................................................................     

1. China DAPU Group (subsidiary: Dapu & Jiake & Rongkuai).

2. China No.1 manufacturer of steel wire mesh machinery since 1999.